8-Meter Oval Plastic Speed Bump Set | Modular Road Calming Solution
The 8-Meter Oval Plastic Speed Bump Set is designed to safely reduce vehicle speed in residential sites, parking lot entrances, and areas requiring low-to-medium speed control. Thanks to its oval form, it does not create a sudden impact during transitions and provides a balanced, comfortable drive, especially for passenger vehicles. It supports regular traffic flow through controlled speed reduction.
Consisting of a modular structure, the set is planned to adapt to different area dimensions and can be used on various ground types. The design, which ensures balanced load distribution, minimizes the pressure applied to the ground, offering long-term and stable use. It is a practical solution for areas such as on-site roads, apartment buildings, and residence entrances.
Installation and Application Information
-
Ground Control: It is sufficient for the installation area to be concrete, asphalt, or cobblestone; the surface should be flat, clean, and solid.
-
Product Placement: Speed bump parts are placed on the ground, and mounting hole points are marked after ensuring correct alignment.
-
Drilling and Fastening: Holes are drilled using a drill at the marked points. Parts are firmly fixed to the ground using coach screws (trifon screws) and plastic dowels.
-
Final Check: After all screws are tightened, the connection points are checked. The product is ready for use immediately after installation.
-
Note: All necessary mounting screws and dowels are included in the product set; no additional equipment is required.
Technical Specifications
- Number of Pieces: 23 Bodies + 2 End Caps
-
Body Dimensions: 30 x 33 x 4 cm
-
End Cap Dimensions: 30 x 10 x 4 cm
-
Net Length: 7.81 meters
-
Width: 30 cm
-
Height: 4 cm
-
Total Weight: 28 kg
-
Material: Plastic (PPC)
-
Total Reflectors: 138 Pieces (Dual-Directional 3+3 Red-White)
Installation and Application Information
Surface Control
It is sufficient for the installation area to be made of concrete, asphalt, or paving stones; the surface should be flat, clean, and in sound condition.
Product Placement
The speed bump components are positioned on the ground, and after ensuring correct alignment, the mounting hole points are marked.
Drilling and Fixing
Holes are drilled at the marked points using a drill. The parts are firmly secured to the ground using coach screws and plastic wall plugs.
Inspection and Commissioning
After all screws are tightened, the connection points are inspected. Once the installation is complete, the product is immediately ready for use.
Note: All necessary mounting screws and plugs are included in the product set, and no additional equipment is required.